|
|
QLogic SANbox 5600 - Switch - 8 ports - 4Gb Fibre Channel + 4 x SFP / 4 x XPAK (empty) + 4 x GBIC (occupied) - 1U - stackable - with 2x QLogic SANblade QLA2460 HBA at Backoffice
QLogic SANbox 5600 - Switch - 8 ports - 4Gb Fibre Channel + 4 x SFP / 4 x XPAK (empty) + 4 x GBIC (occupied) - 1U - stackable - with 2x QLogic SANblade QLA2460 HBA
HDS-SME-PCIX-KIT.P
|
This product is no longer available.
|
Now the benefits of stackable IP switches are available for high performance 4Gb SANs. The SANbox 5600 stackable switch delivers the seamless scalability and performance of a chassis switch, in a simple-to-manage, pay-as-you-grow solution. With sixteen 4Gb ports plus a four-pack of high-speed 10Gb ISL ports, and entry as low as 8 ports with 4-port software-keyed increments and included graphical user interface (GUI) wizards, each SANbox 5600 stackable switch provides maximum flexibility for configuring, managing and scaling SANs.| Product Description | QLogic SANbox 5600 - switch - 8 ports - with 2x QLogic SANblade QLA2460 HBA | | Device Type | Switch - stackable | | Form Factor | External - 1U | | Dimensions (WxDxH) | 43.2 cm x 30.5 cm x 4.3 cm | | Weight | 4.1 kg | | Ports Qty | 8 | | Data Transfer Rate | 4.24 Gbps | | Data Link Protocol | 4Gb Fibre Channel | | Empty Slots | 4 x SFP (mini-GBIC) / 4 x XPAK | | Occupied Slots | 4 x GBIC | | Remote Management Protocol | SNMP, Telnet | | Communication Mode | Full-duplex | | Features | Full duplex capability, auto-sensing per device, auto-negotiation, manageable, stackable, Access Control List (ACL) support | | Power | AC 120/230 V ( 50 - 60 Hz ) | | Bundled with | 2x QLogic SANblade QLA2460 HBA |
GENERAL |
| Device Type | Switch - stackable |
| Enclosure Type | External - 1U |
| Width | 43.2 cm |
| Depth | 30.5 cm |
| Height | 4.3 cm |
| Weight | 4.1 kg |
| Bundled with | 2x QLogic SANblade QLA2460 HBA |
NETWORKING |
| Ports Qty | 8 |
| Data Transfer Rate | 4.24 Gbps |
| Data Link Protocol | 4Gb Fibre Channel |
| Fibre Channel | FC-AL, FC-AL-2, FC-FG, FC-FLA, FC-GS, FC-GS-2, FC-GS-3, FC-PH, FC-PH-2, FC-PH-3, FC-SW-2, FC-Tape, FC-VI |
| Remote Management Protocol | SNMP, Telnet |
| Connectivity Technology | Wired |
| Communication Mode | Full-duplex |
| Features | Full duplex capability, auto-sensing per device, auto-negotiation, manageable, stackable, Access Control List (ACL) support |
EXPANSION / CONNECTIVITY |
| Expansion Slots Total (Free) | 8 ( 4 ) x SFP (mini-GBIC)
4 ( 4 ) x XPAK |
| Interfaces | 1 x management - Ethernet 10Base-T/100Base-TX - RJ-45
8 x network - 4Gb Fibre Channel
1 x management - RS-232 - 9 pin D-Sub (DB-9) |
MISCELLANEOUS |
| Cables Included | 4 x Fibre Channel cable |
| Compliant Standards | CE, UL, TUV, CISPR 22 Class A, cUL, EN 60950, EN 61000-3-2, ICES-003, VCCI Class A ITE, IEC 60950, EN 61000-3-3, EN55022 Class A, UL 60950, CSA 22.2 No. 60950, FCC Part 15 B, EN 55024, FCC Part 15 A |
POWER |
| Power Device | Power supply - internal |
| Installed Qty | 1 |
| Voltage Required | AC 120/230 V ( 50 - 60 Hz ) |
ENVIRONMENTAL PARAMETERS |
| Min Operating Temperature | 5 °C |
| Max Operating Temperature | 40 °C |
| Humidity Range Operating | 5 - 90% |
|
|
|
