|
|
FUJITSU Mobile MHV2040AT - Hard drive - 40 GB - internal - 2.5" - ATA-100 - 4200 rpm - buffer: 8 MB at Backoffice
FUJITSU Mobile MHV2040AT - Hard drive - 40 GB - internal - 2.5" - ATA-100 - 4200 rpm - buffer: 8 MB
MHV2040AT
|
This product is no longer available.
|
Massive capacity has been achieved through the enhancement of the head, the media and the record processing technology allowing up to 60GB per disk, maximum 120GB per drive (2 disks) high capacity. The enhancement of spindle motor driving technology and the power reduction of controller circuit enable to minimize by 1.6 watt at read operation. It is about 0.4 watt or less power consumption compare with the 4,200rpm drives. The enhancement of spindle motor driving technology and the stiffness of mechanism have achieved to reduce the acoustic noise of 2.3 Bels at idle operation. The enhancement of head holding structure to read and write the data of the media enable in high shock tolerance. The drives withstand up to 300Go-p (duration 2ms) operating shock.| Product Description | FUJITSU Mobile MHV2040AT - hard drive - 40 GB - ATA-100 | | Type | Hard drive - internal | | Form Factor | 2.5" x 1/8H | | Dimensions (WxDxH) | 7 cm x 10 cm x 9.5 mm | | Weight | 96 g | | Capacity | 40 GB | | Interface Type | ATA-100 | | Data Transfer Rate | 100 MBps | | Average Seek Time | 12 ms | | Spindle Speed | 4200 rpm | | Buffer Size | 8 MB |
GENERAL |
| Device Type | Hard drive - internal |
| Width | 7 cm |
| Depth | 10 cm |
| Height | 9.5 mm |
| Weight | 96 g |
HARD DRIVE |
| Form Factor | 2.5" x 1/8H |
| Capacity | 40 GB |
| Interface Type | ATA-100 |
| Buffer Size | 8 MB |
PERFORMANCE |
| Drive Transfer Rate | 100 MBps (external) |
| Internal Data Rate | 43.7 MBps |
| Seek Time | 12 ms (average) / 22 ms (max) |
| Track-to-Track Seek Time | 1.5 ms |
| Average Latency | 7.14 ms |
| Spindle Speed | 4200 rpm |
RELIABILITY |
| MTBF | 300,000 hour(s) |
EXPANSION / CONNECTIVITY |
| Interfaces | 1 x ATA-100 - 44 PIN IDC |
| Compatible Bays | 1 x internal - 2.5" x 1/8H |
ENVIRONMENTAL PARAMETERS |
| Min Operating Temperature | 5 °C |
| Max Operating Temperature | 55 °C |
| Humidity Range Operating | 8 - 90% |
| Shock Tolerance | 300 g @ 2ms (operating) / 900 g @ 1ms (non-operating) |
| Vibration Tolerance | 1 g @ 5-500 Hz (operating) / 5 g @ 5-500 Hz (non-operating) |
|
|
|
