|
|
MiLAN MIL-240TX - Transceiver - 10Base-T, 100Base-TX - external at Backoffice
MiLAN MIL-240TX - Transceiver - 10Base-T, 100Base-TX - external
MIL-240TXIN
|
This product is no longer available.
|
The MIL-240 Redundant Port Selectors make up a family of Fast Ethernet fault-tolerant transceivers. They significantly reduce network down-time, adding a new level of redundancy to Fast Ethernet connections. They also provide a redundant path for critical fast devices. In a Fast Ethernet network, a critical device such as a file server may be connected to the rest of the network through a hub or a switch. A common problem in this configuration is that the server is often connected to the network through a single cable. If the cable fails, then the server is disconnected from the rest of the network. Similarly, if a port of a hub or switch to which the server is connected fails, the server is disconnected from the network. The MIL-240TX, MIL-240FXC and MIL-240FXT Redundant Transceivers have three ports: one for the critical (main) device, one for the default (primary) path for the critical device, and another (backup) for the backup path. They are smart devices that will not send any signal on a path that is not active. If the primary path loses its link, then the MIL-240TX, MIL-240FXC and MIL-240FXT will immediately (in less than one microsecond) switch to the backup path. When the primary path re-establishes its link, the MIL-240 Redundant Port Selector family will automatically switch back to the primary path. They significantly reduce network downtime, adding a new level of redundancy to Fast Ethernet connections. They also provide a redundant path for critical fast devices.| Product Description | MiLAN MIL-240TX - transceiver | | Device Type | Transceiver | | Enclosure Type | External | | Localisation | Worldwide | | Cabling Type | 10Base-T, 100Base-TX | | Data Transfer Rate | 100 Mbps | | Data Link Protocol | Ethernet, Fast Ethernet | | Compliant Standards | IEEE 802.3, IEEE 802.3u | | Power | AC 220 V ± 10% ( 50 Hz ) | | Manufacturer Warranty | 5 years warranty |
GENERAL |
| Device Type | Transceiver |
| Enclosure Type | External |
| Enclosure Colour | Grey |
| Localisation | Worldwide |
NETWORKING |
| Connectivity Technology | Wired |
| Cabling Type | 10Base-T, 100Base-TX |
| Data Link Protocol | Ethernet, Fast Ethernet |
| Data Transfer Rate | 100 Mbps |
| Status Indicators | Port status, power |
| Compliant Standards | IEEE 802.3, IEEE 802.3u |
EXPANSION / CONNECTIVITY |
| Interfaces | 1 x network - Ethernet 10Base-T/100Base-TX - RJ-45 female - 1 |
| Connections | 2 x network - Ethernet 10Base-T/100Base-TX - RJ-45 female - 2 |
POWER |
| Power Device | Power adapter - external |
| Voltage Required | AC 220 V ± 10% ( 50 Hz ) |
MANUFACTURER WARRANTY |
| Service & Support | 5 years warranty |
| Service & Support Details | Limited warranty - replacement - 5 years - carry-in |
ENVIRONMENTAL PARAMETERS |
| Min Operating Temperature | 0 °C |
| Max Operating Temperature | 50 °C |
| Humidity Range Operating | 5 - 90% |
|
|
|
