|
NETGEAR ProSafe WAGL102 Dual Band Light Wireless Access Point - Radio access point - 802.11a/b/g at Backoffice
NETGEAR ProSafe WAGL102 Dual Band Light Wireless Access Point - Radio access point - 802.11a/b/g WAGL102-100EUS
|
This product is no longer available.
|
NETGEAR's ProSafe Dual Band Wireless Access Point WAGL102 delivers the secure, reliable, high performance wireless local area networks (WLANs) today's mobile workforce demands. The WAGL102 Access Point supports both 5 GHz and 2.4 GHz 54 Mbps radio transmission in both 802.11g and 802.11a in turbo mode. It supports up to 128 simultaneous wireless clients and client types within the same coverage area. Managed and configured by the NETGEAR Prosafe Smart Wireless Switch, the WAGL102 is a "light" wireless access point, which is part of the overall NETGEAR ProSafe Smart Wireless Solution. The WAGL102 supports integrated IEEE 802.3af Power over Ethernet (PoE) and Wi-Fi certification.Managed and configured by the NETGEAR ProSafe Smart Wireless Switch (WFS709TP), the WAGL102 is a "light" wireless access point that implements the 802.11 standard. As part of the centralized architecture, much of the security configuration such as WPA2-Enterprise (802.11i), WPA2 and 802.1x support happens at the NETGEAR ProSafe WFS709TP. The NETGEAR ProSafe Smart Wireless Switch also supports MAC address authentication, support for multiple BSSID/ VLANs and guest/contractor access.As part of the NETGEAR ProSafe Smart Wireless Solution, the WAGL02 is cost-effective and simple to install and use. In addition, it's Wi-Fi certified and plenum rated - appropriate for placement above drop-down ceilings and under raised floors. Fitted with two powerful detachable 5 dBi antennas and compatible with NETGEAR's ProSafe 2.4 GHz antennas for expanded wireless capacity and range. The WAGL102 includes the embedded IEEE 802.3af Power over Ethernet (PoE) port which expands installation options by eliminating the need to locate the Light Wireless Access Point near a power outlet.Product Description | NETGEAR ProSafe WAGL102 Dual Band Light Wireless Access Point - radio access point | Device Type | Radio access point | Enclosure Type | External | Dimensions (WxDxH) | 19.1 cm x 12.2 cm x 3.2 cm | Weight | 0.62 kg | Localisation | Europe | Data Link Protocol | IEEE 802.11b, IEEE 802.11a, IEEE 802.11g | Features | Auto-sensing per device, auto-negotiation, auto-uplink (auto MDI/MDI-X) | Power Over Ethernet (PoE) | Yes | Manufacturer Warranty | NETGEAR lifetime warranty |
GENERAL |
Device Type | Radio access point |
Width | 19.1 cm |
Depth | 12.2 cm |
Height | 3.2 cm |
Weight | 0.62 kg |
Localisation | Europe |
NETWORKING |
Form Factor | External |
Connectivity Technology | Wireless |
Data Transfer Rate | 108 Mbps |
Data Link Protocol | IEEE 802.11b, IEEE 802.11a, IEEE 802.11g |
Spread Spectrum Method | OFDM, DSSS |
Status Indicators | Link activity, power, link OK, test mode, 100M device connected |
Features | Auto-sensing per device, auto-negotiation, auto-uplink (auto MDI/MDI-X) |
Compliant Standards | IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11g |
AERIAL |
Antenna | External detachable |
Antenna Qty | 2 |
Directivity | Omni-directional |
Gain Level | 5 dBi |
EXPANSION / CONNECTIVITY |
Interfaces | 1 x network - Radio-Ethernet 1 x network / power - Ethernet 10Base-T/100Base-TX - RJ-45 |
MISCELLANEOUS |
Cables Included | 1 x network cable |
Compliant Standards | CISPR 22 Class B, FCC Part 15 B, FCC Part 15 C, EN 60950-1 |
POWER |
Power Over Ethernet (PoE) | Yes |
Power Device | Power adapter - external |
MANUFACTURER WARRANTY |
Service & Support | NETGEAR lifetime warranty |
ENVIRONMENTAL PARAMETERS |
Min Operating Temperature | 0 °C |
Max Operating Temperature | 40 °C |
Humidity Range Operating | 0 - 90% |
|
|
|