|
|
Cisco 888 G.SHDSL Wireless Router with ISDN backup and 3G - wireless router
CISCO888GW-GN-E-K9
Prices in Euro incl. Taxes
Cisco 880 Series Integrated Services Routers are the next generation of fixed-configuration routers that provide collaborative business solutions for secure data communication to small businesses and enterprise teleworkers. The 3G wireless on the Cisco 880G series routers offers a cost-effective, rapidly deployable, reliable, and secure backup solution. With data rates approaching T1 speeds, 3G wireless can be used for primary WAN connectivity in locations where wireline services such as DSL and ISDN are not available or are too expensive to deploy. The Cisco 880G Series Integrated Services Routers support the 3G standards (High-Speed Packet Access and EVDO Rev A) and are backward-compatible with Universal Mobile Telecommunications Service (UMTS), Enhanced Data rates for Global Evolution (EDGE), General Packet Radio Service (GPRS), and EVDO Rev0/1xRTT.
GENERAL |
| Device Type | Wireless router |
| Form Factor | External |
| Width | 32.5 cm |
| Depth | 24.9 cm |
| Height | 4.4 cm |
MEMORY |
| RAM | 256 MB (installed) / 768 MB (max) |
| Flash Memory | 128 MB |
NETWORKING |
| Connectivity Technology | Wireless, wired |
| Integrated Switch | 4-port switch |
| Data Link Protocol | Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft 2.0) |
| Switching Protocol | Ethernet |
| Network / Transport Protocol | L2TP, IPSec, PPPoE, PPPoA |
| Routing Protocol | OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, PIM-SM, GRE |
| Remote Management Protocol | Telnet, SNMP 3, HTTP, HTTPS |
| Capacity | IPSec VPN tunnels : 20 |
| Status Indicators | Port status, power |
| Features | NAT support, power over Ethernet (PoE), VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Stateful Packet Inspection (SPI), content filtering, DiffServ support, MAC address filtering, Broadcast Storm Control, IPv6 support, Intrusion Prevention System (IPS), Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Wi-Fi Multimedia (WMM) support, Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), DHCP server |
| Compliant Standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.11b, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, Wi-Fi CERTIFIED, IEEE 802.11n (draft 2.0) |
AERIAL |
| Aerial | External detachable |
| Antenna Qty | 3 |
| Directivity | Omni-directional |
| Gain Level | 2 dBi |
COMMUNICATIONS |
| Type | DSL modem / wireless cellular modem |
| Protocols & Specifications | ITU G.991.2 (G.shdsl) |
EXPANSION / CONNECTIVITY |
| Expansion Slots Total (Free) | 1 ( 1 ) x ExpressCard
1 ( 1 ) x memory |
| Interfaces | 4 x network - Ethernet 10Base-T/100Base-TX - RJ-45
1 x management - console - RJ-45
1 x modem - SHDSL ( WAN )
1 x USB - 4 PIN USB Type A
1 x modem - ISDN BRI ST - RJ-45 ( WAN )
1 x network - Radio-Ethernet
1 x mobile phone |
MISCELLANEOUS |
| Encryption Algorithm | LEAP, DES, Triple DES, MD5, SSL, TLS, PEAP, TTLS, WPA, WPA2, PKI, 128-bit AES, 192-bit AES, 256-bit AES |
| Authentication Method | RADIUS, TACACS+ |
| Compliant Standards | ETSI, VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1 |
POWER |
| Power Device | Power adapter - external |
| Voltage Required | AC 120/230 V ( 50/60 Hz ) |
| Power Provided | 60 Watt |
SOFTWARE / SYSTEM REQUIREMENTS |
| OS Provided | Cisco IOS Advanced Security |
ENVIRONMENTAL PARAMETERS |
| Min Operating Temperature | 0 °C |
| Max Operating Temperature | 40 °C |
| Humidity Range Operating | 10 - 85% |
|
