|
|
Adaptec SCSI RAID 5400S - Storage controller (RAID) - 4 Channel - Ultra160 SCSI - 160 MBps - RAID 0, 1, 5, 10, 50, JBOD - PCI 64 at Backoffice
Adaptec SCSI RAID 5400S - Storage controller (RAID) - 4 Channel - Ultra160 SCSI - 160 MBps - RAID 0, 1, 5, 10, 50, JBOD - PCI 64
ASR-5400S
|
This product is no longer available.
|
In today's high-demand server environments, data loss can translate to revenue loss. The last thing you want to worry about is the loss of critical data due to a drive failure. The Adaptec 5400S is the most reliable PCI RAID solution available, with advanced features like PCI hot-plug, hot-spare and hot-swap disk drive support. In addition, the Adaptec 5400S supports RAID levels 0, 1, 0/1, 5, 0/5, and JBOD. A battery back-up module is standard to provide additional fault tolerance. The Adaptec 5400S also offers Online Capacity Expansion and RAID Level Migration (morphing). Adding capacity and modifying fault tolerance levels provide the ease and flexibility necessary to modify storage systems as businesses grow and needs change. Users can configure multiple arrays per disk drive, each with its own RAID level, stripe size, and file system. Investments in legacy drive technology are protected with the ability to fully utilize the capacity of new, larger disk drives in the same arrays as older, smaller disk drives.| Product Description | Adaptec SCSI RAID 5400S - storage controller (RAID) - Ultra160 SCSI - PCI 64 | | Device Type | Storage controller (RAID) - plug-in card | | Interface Type | PCI 64 hot-plug 33 MHz | | Dimensions (WxDxH) | 31.1 cm x 10.7 cm | | Controller Interface Type | Ultra160 SCSI | | Data Transfer Rate | 160 MBps | | Buffer Size | 128 MB (installed) / 256 MB (max) | | Supported Devices | Disk array (RAID) | | Channel Qty | 4 | | Max Storage Devices Qty | 60 | | RAID Level | RAID 0, RAID 1, RAID 5, RAID 10, RAID 50, JBOD | | System Requirements | Microsoft Windows 2000, Novell NetWare 5.1, Red Hat Linux 7.1, Microsoft Windows NT, SunSoft Solaris x86 7, SCO OpenServer 5.0.6, SCO OpenServer 5.0.5, SuSE Linux 7.2, Caldera OpenUnix 8, Novell NetWare 6, FreeBSD 4.4, Red Hat Linux 7.2, SuSE Linux 7.3 | | Manufacturer Warranty | 3 years warranty |
GENERAL |
| Device Type | Storage controller (RAID) - plug-in card |
| Interface Type | PCI 64 hot-plug 33 MHz |
| Depth | 31.1 cm |
| Height | 10.7 cm |
STORAGE CONTROLLER |
| Controller Interface Type | Ultra160 SCSI |
| Data Transfer Rate | 160 MBps |
| Buffer Size | 128 MB (installed) / 256 MB (max) |
| Supported Devices | Disk array (RAID) |
| Channel Qty | 4 |
| Max Storage Devices Qty | 60 |
| RAID Level | RAID 0, RAID 1, RAID 5, RAID 10, RAID 50, JBOD |
| Processor | Intel SA-110 233 MHz |
EXPANSION / CONNECTIVITY |
| Expansion Slot(s) | Memory |
| Interfaces | 4 x storage - Ultra160 SCSI - 68 PIN VHDCI (Mini-Centronics) ( external )
2 x storage - Ultra160 SCSI - 68 pin HD D-Sub (HD-68) ( internal ) |
| Compatible Slots | 1 x PCI 64 hot-plug 33 MHz |
SOFTWARE / SYSTEM REQUIREMENTS |
| Software Included | Drivers & Utilities |
| OS Required | Microsoft Windows 2000, Novell NetWare 5.1, Red Hat Linux 7.1, Microsoft Windows NT, SunSoft Solaris x86 7, SCO OpenServer 5.0.6, SCO OpenServer 5.0.5, SuSE Linux 7.2, Caldera OpenUnix 8, Novell NetWare 6, FreeBSD 4.4, Red Hat Linux 7.2, SuSE Linux 7.3 |
MANUFACTURER WARRANTY |
| Service & Support | 3 years warranty |
| Service & Support Details | Limited warranty - parts and labour - 3 years - carry-in |
ENVIRONMENTAL PARAMETERS |
| Min Operating Temperature | 0 °C |
| Max Operating Temperature | 40 °C |
|
|
|
