|
|
Allied Telesis AT EX1002 - Media converter - 1000Base-SX, 1000Base-X - SC multi-mode - SC multi-mode - external - up to 2 km - 850 nm / 1300 nm at Backoffice
Allied Telesis AT EX1002 - Media converter - 1000Base-SX, 1000Base-X - SC multi-mode - SC multi-mode - external - up to 2 km - 850 nm / 1300 nm
AT-EX1002
|
This product is no longer available.
|
The AT-EX1002 extends Gigabit Ethernet distances up to 2 km (1.25 miles) using multi-mode fiber and features one 1000SX fiber port and one 1000X fiber port. The 1000SX port extends distances up to 500 m (1, 666 ft) while the 1000X port can extend distances up to 2 km (1.25 miles), both in full-duplex operation. Additionally, the AT-EX1002 can be used as a standalone tabletop unit or in an optional rackmount such as the AT-MCR12, TRAY4 or TRAY1 chassis. Frequently, the high-speed fault-tolerant features of Fiber Distributed Data Interface (FDDI) have been used to build backbone networks. However, the growth of new applications that require extremely high rates of throughput, greater than that allowed by FDDI, have emerged and in many cases exceeded the capabilities of FDDI. Examples of high demand network applications include streaming audio and video content. The solution for many FDDI networks is to migrate FDDI to Gigabit Ethernet, which offers the same resiliency as FDDI with greater bandwidth capability. However, one of the principal disadvantages to migrating from FDDI to Gigabit Ethernet has been the cost of replacing the legacy multi-mode fiber optic cabling of the FDDI topology to one designed for Gigabit Ethernet. Currently, Gigabit Ethernet transmission on multi-mode fiber is limited to a maximum of 550 m (1830 ft) on 50/125 micron fiber and 275 m (916 ft) on 62.5/125 micron fiber. In network configurations requiring greater distances, network administrators have been confronted with the choice of either retaining FDDI and its lower bandwidth or replacing the existing multi-mode fiber cable with single-mode cable, usually at great cost. The AT-EX1002 Gigabit Ethernet multi-mode media extender greatly simplifies this migration by allowing you to install Gigabit Ethernet while maintaining the existing multi-mode fiber cable. With this unit, you can extend the distance of Gigabit Ethernet transmission over multi-mode fiber cable from the current limitation of 550 m (1830 ft) to 2 km (1.24 miles). In many situations, this eliminates the need of replacing the existing multi-mode fiber cable by allowing you to use the legacy cable system.| Product Description | Allied Telesis AT EX1002 - media converter | | Device Type | Media converter | | Enclosure Type | External | | Dimensions (WxDxH) | 10.5 cm x 9.5 cm x 2.5 cm | | Weight | 0.3 kg | | Cabling Type | 1000Base-SX, 1000Base-X | | Optical Wave Length | 850 nm / 1300 nm | | Data Link Protocol | Gigabit Ethernet | | Max Transfer Distance | 2 km | | Features | Full duplex capability | | Compliant Standards | FCC Class A certified, CSA, EN 60950, EN55022, UL 1950 |
GENERAL |
| Device Type | Media converter |
| Enclosure Type | External |
| Width | 10.5 cm |
| Depth | 9.5 cm |
| Height | 2.5 cm |
| Weight | 0.3 kg |
NETWORKING |
| Connectivity Technology | Wired |
| Cabling Type | 1000Base-SX, 1000Base-X |
| Data Link Protocol | Gigabit Ethernet |
| Optical Wave Length | 850 nm / 1300 nm |
| Max Transfer Distance | 2 km |
| Status Indicators | Power, link OK |
| Features | Full duplex capability |
EXPANSION / CONNECTIVITY |
| Interfaces | 1 x network - Ethernet 1000Base-X - SC multi-mode female x 2
1 x network - Ethernet 100Base-SX - SC multi-mode female x 2 |
MISCELLANEOUS |
| Rack Mounting Kit | Optional |
| Compliant Standards | FCC Class A certified, CSA, EN 60950, EN55022, UL 1950 |
POWER |
| Power Device | Power adapter - external |
| Power Consumption Operational | 6 Watt |
ENVIRONMENTAL PARAMETERS |
| Min Operating Temperature | 0 °C |
| Max Operating Temperature | 40 °C |
| Humidity Range Operating | 5 - 95% |
|
|
|
